
Ideal for assembling, sealing and repairing all kinds of copper pipes. Apply to dry surfaces.
Long-lasting repair. Once completely hardened, the putty can be drilled, sawed, filed and painted.
Instructions for use:
Turn off the water supply – if necessary.
Use protective gloves.
1 – Sand, clean, degrease and dry the surface.
2 – Remove the plastic film from the portion to be cut. Using a blade or knife, cut a slice of putty to the desired amount.
Place the rest of the putty back into the tube and reseal it to keep it fresh for later.
3 – Mix the putty until you get a solid, even color.
4 – Apply the putty directly to the area to be repaired, pressing down firmly and making sure that the edges are well sealed.
When applying the product, make sure it overlaps the area to be repaired by a few millimeters.
5 – Wait one hour before putting the water back on.
ATMOSOLUTION TIPS :
Make a string of putty for repairing slits and a patch for repairing holes.
For repairing leaky pipes, form a ring of putty around the pipe.
Safety Data Sheet :