PVC – Copper – Steel – Galvanized steel
Can be used in wet environments Hardens in 5 minutes!
- White pipe repair bandage. 5 cm x 150 cm.
- Pressure: 4 bars
- Temperature: 80°C
- For pipe diameters of more than 3 cm.
- Dry to the touch in 5 mins.
- Ready to use after 24 hours.
- Maximum repair hole width: 3cm.
2 components :2 components :1x block of sealing putty -1 x Aluminum bag containing the Pipe repair bandage.
INSTRUCTIONS FOR USE :
1 – Turn off the water supply for both pressurized and non-pressurized water pipes.
2 – First, clean the surface to be sealed using the sandpaper provided to remove any rough spots on the surface.
3- Important: Use the gloves provided when handling the product.
4 – Remove the sealing putty from the plastic film and mix the product until you obtain a solid, even color.
5 – For repairing a hole, make a 4-5cm diameter patch of even thickness. For repairing a crack, roll the putty and adapt it to the size of the crack. (The crack should not exceed one third of the pipe diameter).
6 – Apply the mixture directly onto the area to be repaired by stretching it and pressing down hard (just above the crack).
7 – Wait at least 10 minutes, until the sealant is dry and hard to the touch, before proceeding to the next step.
8 – Remove the bandage from the bag – once the bag has been opened, the product must be used immediately.
9 – Submerge the bandage in water for 20 seconds while kneading it, and then remove it from the water.
10 – Wrap the bandage around the sealing putty, stretching it diagonally with a minimum of 6 layers over the area to be repaired. The different layers must overlap.
11- The product heats up and starts to work. Leave the resin to work without smoothing the product.
12- Allow to harden for at least 24 hours before putting the water back on.
Suitable for diameters from 3 to 8 cm. Not suitable for pipes fitted close to a wall.
Do not use on central heating systems or on gas pipes.
For repairing copper and soldered joints, use ATMOSOLUTION Copper Cold Solder or ATMOSOLUTION Water Putty.