Instructions for use :
1- Remove all traces of the old seal and clean thesurface well with methylated spirits. AtmoStick must be applied to a clean, dry surface, free of any greasy product.
2- Measure from one angle to the other and cut the corresponding AtmoStick lengths.
3- Start with the longest length by gradually removing the protective paper.
Apply by pressing firmly down the entire length from angle to angle.
4- Repeat step three (3) times for the other sections.
Wait 8 hours before using your installation.
Atmosolution tips :
For inside corners, cut the ends to be joined at 45 ° for a perfect finish