Fiber reinforced sealing tape.
It is designed to seal conical and cylindrical threaded metal/plastic connections.
This ultra-resistant tape can be re-positioned and is suitable for water, steam, gas, compressed air or diluted acids.
Instructions for use :
Turn off the water supply.
1- Fittings must be clean, dry and free of grease.
2- With the green side facing the thread, wrap the tape from the end of the fitting upwards, following the direction of the threads and applying slight tension. Overlap the layers by 50%.
3- Stick the tape to the thread using your fingers.
4- Position the fitting and screw it on.
5- Tighten with a wrench. The system can be immediately returned to normal pressure.