Ideal for repairing, sealing, plugging water leaks, connecting pipes of different diameters and materials…
Suitable for all types of rigid materials, metal, copper, wood and plastic (except polypropilene).
Slow curing: the putty conforms to all shapes.
Repositionable/malleable. Long lasting repair.
Once the putty has hardened, it can be drilled, sawed, filed, painted.
Hardens under water too (longer curing time).
Instructions for use :
This product must be stored and handled at a minimum temperature of 20°C.
1 – If possible, turn off the water supply or isolate the damaged pipe.
2 – The use of gloves is recommended.
3 – Sand, clean, degrease the surface.
4 – Cut 2 pieces alongside the tubes in order to have the same amount of resine and hardener.
Extract the products from the cut-off tubes.
Close the tubes with plugs until next use.
5 – Knead together both products until colour is uniform and homogeneous.
6 – Apply directly on the surface pressing firmly. Press well on the sides. Roll it into a rope for cracks or make a disk shape for holes
Dry to the touch after 1H30. Wait at least this long.
Wait at least 4H for a better result (repressurise system) and wait 12H until it hardens completely.
ATMOSOLUTION TIPS :
Before it hardens , use a (gloved) wet finger to smooth out the applied product.
Underwater repair = Longer curING time